Incoloy 800H / 800HT Coil
Incoloy 800H coil is made of an austenitic heat-resistant alloy widely used in high-temperature environments. It has attracted much attention because of its good high-temperature strength, oxidation resistance and corrosion resistance. Incoloy 800H is widely used in equipment manufacturing in various high-temperature environments, such as aerospace, petrochemical, energy and other fields.
- Product Description
- Spot Warehouse
- Product Inspection
- Product Measurement
- Product Packaging
-
- Commodity name: Incoloy 800H / 800HT Coil
Incoloy 800H coil is made of an austenitic heat-resistant alloy widely used in high-temperature environments. It has attracted much attention because of its good high-temperature strength, oxidation resistance and corrosion resistance. Incoloy 800H is widely used in equipment manufacturing in various high-temperature environments, such as aerospace, petrochemical, energy and other fields.
Incoloy 800H / 800HT Coil Description
Incoloy 800H is a nickel-based alloy containing approximately 22% chromium, 39% iron, and 33% nickel, with the balance being carbon, silicon, manganese and other elements. This alloy has excellent high temperature resistance, its maximum operating temperature can reach 1100°C, and it also has good toughness and ductility at room temperature. In addition, Incoloy 800H also has excellent oxidation resistance and corrosion resistance, and can maintain a long service life in high temperature environments. Incoloy 800H coil has good processing properties and can be used for hot and cold processing. During thermal processing, the heating temperature and cooling rate should be controlled to avoid cracks and deformation.
Product Parameters
Product Name
Incoloy 800H / 800HT Coil
Thickness
2.5mm-10.0 mm
Length
2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc.
Width
610-2000 mm
Standard
ASTM, AISI, JIS, GB, DIN, EN, etc.
Surface
BA, 2B, NO.1, NO.4, 4K, HL, 8K, etc.
Certificate
ISO, SGS, BV
Production Technology
Hot Rolling, Cold Rolling
Chemical Composition
C
Al
Si
S
Ti
Cr
Mn
Fe
Ni
Cu
0.1 max
0.15 - 0.60
1.0 max
0.015 max
0.15 - 0.60
19.0 - 23.0
1.5 max
39.5 min
30.0 - 35.0
0.75 max
Mechanical Properties
Tensile Strength (ksi)
0.2% Yield Strength (ksi)
Elongation% in 2 inches
75
30
30
Physical Performance
Units
Temperature in°C
Density
7.94 g/cm³
Room
Specific Heat
0.11 Kcal/kg.C
21°
Melting Range
1357-1385°C
-
Modulus of Elasticity
196.5 KN/mm²
20°
Electrical Resistivity
98.9 µΩ.cm
20°
Coefficient of Expansion
14.4 µm/m °C
20 - 100°
Thermal Conductivity
11.5 w/m-° K
20°
Scope of Application
Used in industrial furnaces, heat treatment equipment, chemical and petrochemical processing, superheaters and reheaters in power plants, pressure vessels, heat exchangers, etc.
-
Incoloy 800H / 800HT Coil - Stock Warehouse
-
Incoloy 800H / 800HT Coil - Product Inspection
Tensile Strength Testing Tensile Strength Testing Physical Performance Testing Chemical Composition Testing 
Inspection Hardness Testing Spectral Detection Mechanical Properties -
Incoloy 800H / 800HT Coil - Product Measurement
Thickness measurement Thickness measurement Thickness measurement Width measurement 
Measurement Measurement Measurement Measurement -
Incoloy 800H / 800HT Coil - Product Packaging
Baowu Special steel
Your reliable steel supplier
Baowu Special steel has 10+ warehouses with ready stock. The annual supply capacity is approximately 10 million tons. It has 10 years of experience in large-scale project supply. The customer reorder rate reaches 86%. We ensure quality and quantity, provide material certificates, and will refund if the products are not qualified, so please be assured the purchase.
Get A Quote
3D Virtual Pavilion
Douyin Official Media
Flagship Micro Mall
WeChat Public Number
CONTACT US
Mobile: +86-13256761911
Wechat: +86-13256761911
Whatsapp: +86-13256761911
Tel : +86-531-86666666
Address : 1-709-1 Ginza Jingdu International Plaza, No.66 Shunhe East Street, Luoyuan Street, Shizhong District, Jinan City, Shandong Province
Baowu Special steel Products (Shandong) Co., Ltd.