Differential Thickness Tinplate Coil
According to the difference of the tin plating thickness on the front and back of the thin steel plate, tinplate coil can be divided into two types: equal thickness tinplate coil and differential thickness tinplate coil. Among them, differential thickness tinplate coil refers to tinplate coil whose one surface carries a heavier coating than the other.
- Product Description
- Spot Warehouse
- Product Inspection
- Product Measurement
- Product Packaging
-
- Commodity name: Differential Thickness Tinplate Coil
According to the difference of the tin plating thickness on the front and back of the thin steel plate, tinplate coil can be divided into two types: equal thickness tinplate coil and differential thickness tinplate coil. Among them, differential thickness tinplate coil refers to tinplate coil whose one surface carries a heavier coating than the other.
Differential Thickness Tinplate Coil Description
Tinplate coil, also known as tin-plated steel coil, is a thin steel coil plated with a layer of tin on both sides. The purpose of this coating is to provide corrosion protection and enhance the appearance of the steel. Differential coated tinplate coil is electrolytic tinplate coil, one surface of which carries a heavier coating than the other. This material is used principally for the manufacture of containers which require higher corrosion resistance inside than outside. In order to distinguish material having differential coatings, it is customary to mark one surface. Differential coatings may have economic advantages when the corrosive conditions to be encountered by the two surfaces differ in severity.
Product ParametersProduct Name
Differential Thickness Tinplate Coil
Thickness
0.18mm-0.50mm
Width
260mm-980mm
Length
Support customization
Tin Coating
General:2.8g or 5.6g, can be produced according to your needs
Substrate Type
MR / SPCC / L / D
Reference Standard
GB/T 2520, JIS G3303, JIS G3315, DIN EN 10202, DIN EN 10203
Surface State of Tinplate
Surface State
Features
Light Surface
Electroplated tin smooth raw material strip after melting treatment to obtain the glaze,Smooth surface with very fine grindstone pattern
Stonetextured Surface
Electroplating tin raw material with the glaze obtained after melting treatment,Grindstone pattern with certain direction
Silvercolor Surface
Electroplating tin raw material with the glazed surface obtained after melting treatment, the surface is rough and dull
Mattless Surface
The surface of the substrate is rough and dull, and the tin plating layer is not soft melting
Substrate Type
Substrate Type
Introduction
MR
The most general steel, steelmaking impurity residue less, excellent mechanical properties and corrosion resistance
L
Used for the production of acidic contents (oranges, yellow peaches, pineapples, etc.), and the inner surface of the food cans for iron high corrosion resistance tinplate substrate steel, such tinplate is often calledKPlate
D
Used to produce two pieces of high-processing tin plate substrate steel, such tin plate is often called.DIMaterial
SPCC
Chinese characteristics, using ordinary hot rollingSPHCProduces, usually used for miscellaneous tank purposes.
Coating Weight
Classification
Representation of Tin Coating Weight
Tin Plating Nominal Weight (g/m2)
Minimum Average Tin Plating Weight (g/m2)
Equal Tin Plating (E)
1.1/1.1
1.1/1.1
1.8
2.2/2.2
2.2/2.2
4.0
2.8/2.8
2.8/2.8
5.0
5.6/5.6
5.6/5.6
10.5
Differentiated Tin Plating (D/A)
2.2/1.1
2.2/1.1
2.0/0.9
2.8/1.1
2.8/1.1
2.25/0.9
5.6/1.1
5.6/1.1
5.05/0.9
2.8/2.2
2.8/2.2
2.25/2.0
5.6/2.2
5.6/2.2
5.05/2.0
5.6/2.8
5.6/2.8
5.05/2.25
Chemical Composition
No.
C
Si
Mn
S
P
Cu
Ni
Cr
Mo
D
0.12
0.03
0.6
0.05
0.02
0.2
0.15
0.1
0.05
L
0.13
0.03
0.6
0.05
0.15
0.03
0.04
0.06
0.05
MR
0.13
0.03
0.6
0.05
0.2
0.2
0.2
0.1
0.05
Mechanical Properties & Applications
Standard Name
Nominal Hardness HR30TS
Strong Yield MPA
Scope of Application
T-1
49
230 /-50
Drawing requirements, drawn ironing cans, nozzles, nozzles, closures
T-2
53
245 /-50
Ring and plug, dome, closure, shallow pull and special tank parts
T-2.5
55
260 /-50
Battery cell, small can cover and body
T-3
57
275 /-50
Cans and cans, large diameter caps, crown caps
T-3.5
59
290 /-50
Can body, closure and crown lid
T-4
61
340 /-50
Can body, closure and crown lid
T-5
65
480 /-50
Cans and cans
Ordering Notes
The ordering elements for tin plating generally include: standard grade (including steel grade code, annealing method and other information such as MR T-3 CA), size (the default order is thickness * width * length, tin plating amount ((different thickness plating) Tin needs to add A/D as the marking line mark, if not, no marking line will be marked), surface, order quantity, etc.
When ordering tin plating, please confirm with our sales staff the end use, such as canbody, ends, twist off caps, crown cork, EOE, etc., as well as the contents, special contents such as milk powder, high protein food, mushrooms, fruits, etc.; -
Differential Thickness Tinplate Coil - Stock Warehouse
-
Differential Thickness Tinplate Coil - Product Inspection
Tensile Strength Testing Tensile Strength Testing Physical Performance Testing Chemical Composition Testing 
Inspection Hardness Testing Spectral Detection Mechanical Properties -
Differential Thickness Tinplate Coil - Product Measurement
Thickness measurement Thickness measurement Thickness measurement Width measurement 
Measurement Measurement Measurement Measurement -
Differential Thickness Tinplate Coil - Product Packaging
Baowu Special steel
Your reliable steel supplier
Baowu Special steel has 10+ warehouses with ready stock. The annual supply capacity is approximately 10 million tons. It has 10 years of experience in large-scale project supply. The customer reorder rate reaches 86%. We ensure quality and quantity, provide material certificates, and will refund if the products are not qualified, so please be assured the purchase.
Get A Quote
3D Virtual Pavilion
Douyin Official Media
Flagship Micro Mall
WeChat Public Number
CONTACT US
Mobile: +86-13256761911
Wechat: +86-13256761911
Whatsapp: +86-13256761911
Tel : +86-531-86666666
Address : 1-709-1 Ginza Jingdu International Plaza, No.66 Shunhe East Street, Luoyuan Street, Shizhong District, Jinan City, Shandong Province
Baowu Special steel Products (Shandong) Co., Ltd.